See More Detail and Offer , Discount

Monday, November 12, 2012

The Ice Man - 1940

The Ice Man - 1940


The Ice Man Cometh



The Ice Man - 1940


Of course no one had electric refrigerators in the 1940's, at least not in our neighborhood. So we were solely dependent on the "Ralph Kramden" ice box. This gadget was unique and useful. A two compartment unit made out of wood. And, it was lined with steel painted white. The top compartment was normally smaller and that held the food that needed refrigeration. The lowest section was larger and held the block of ice.


Ice Crusher

The Ice Man - 1940


The top didn't have any shelves as I remember so food was kind of stuffed in as best you could. The lowest could if needed be used to keep things cold as well as keep the ice. No Freezer Section. If you wanted ice for drinks you just grabbed the ice pick and chipped off some ice for your drink. Or, take a large chunk wrap it in a towel and beat it with a hammer on the kitchen table. The early ice crusher was born. Let me tell you how impressed I was just with ice cubes in water. When my parents finally upgraded to a different home my Mom one day set out a pitcher of water with ice cubes in it. No holiday, no special occasion. I concept we were rich.



The Ice Man - 1940

The Ice Man - 1940


The whole doing depended on keeping a regular provide of ice in the ice box. The ice firm in case,granted a sign that could be hung in the front window of your house. It had four side with four different sizes of ice on each side. Our job as kids after we were told was to hang the ice sign in the window and to make sure the size needed was at the bottom. And you good not forget.

The ice man would come along in his delivery truck on some designated schedule. He would read the sign in the window. Cut a block of ice that matched the signs requirement. He had a leather sling and shoulder pad that he used to carry the cube up on his shoulder with.Our guy was lucky. We lived in a house and the ice box was in the kitchen on the first floor. Sometimes the Ice Man had to carry the block of ice up flights of stairs to people who lived in apartments. His tools were ice tongs and ice pick. And of course a strong back. Just think about this mans job. All day long up into the truck, cut a chunk of ice. Dismount load the block on your back and carry it to the Ice Box. And, ice tongs and ice picks, us kids were impressed.

You got automated delivery if the sign was in the window. The ice man just opened the front door with the cube of ice on his shoulder and hollered out "Ice Man". In he came found the ice box and put the new block of ice into it. Didn't matter what was going on in the family. He just let himself in the house. And, if I remember right he got paid cash on the spot.

Along his route as he was delivering he would sound the call "Ice Man", for those who needed ice but forgot to put up the sign. Or, the kids who forgot to do what their parents told them. If no one was colse to to corral him then you got no ice. And, trouble was afoot. For you.

Now there were times when thing just didn't work out. We would run out of ice and the Ice Man wasn't due to deliver for some time. Here's where the advantages of having a child came in. Mom would say, "Get the wagon and go get some ice.". I don't know where the wagon ever came from but one became available. It was our job to go over to the Ice House and bring home a block of ice. For me that was a 10 block round trip. And, sometimes Mom would let you pick up a block of ice for a neighbor too.

Wagon in tow off you would go to get the ice. 8th and Dupont street on the projection over from Dela Donnes Store was the Ice House. It was a 8' X 10' wooden shed. Lined with steel and full of ice. It was a sub hub for solitaire Ice And Coal. You just asked the attendant for two 15cent blocks of ice and he hacked them off for you and with his tongs loaded them on your wagon.

Now this Ice Man was too scary for us kids. He was an aged black man. Seeing back probably not paid very much in a labor arduous job. He was bent over and had a contorted body and face. I don't remember either he was amiable or not. I just wanted to get my ice and get out of there. When no one was buying ice he had a stool in front of the ice house he would sit on. To me he just looked menacing with those tongs and ice pick.

The trip home with ice in the summer time was a fun trip. normally there was some change. And, I would take the convert and put it on top of the ice and let it melt down into the block of ice. By the time I got home it could be several inches down into the ice. A exquisite vertical column. How we got the ice cube into the house I don't remember. We probably had a set of ice tongs at home to carry the block of ice in with.

I never relished these jobs our parents put on us. But liking wasn't an option for our generation. We were the cheap labor and yet most of us grew up without going to jail. And we got an study that allowed us to sustain and raise our families. Chores were just like growing up - they just happened. The chores were there and we were imaginable to help.

The Ice Man - 1940






Ice Crusher

automatic can crusher

Sunday, October 7, 2012

Raspadas - Refreshing Mexican Snow Cones

Raspadas - Refreshing Mexican Snow Cones


There are Mexican sweetmeat recipes for all seasons - gooey cinnamon-scented chocolate cakes with hot chocolate sauce to warm you up in the winter and chilled strawberry soup to cool you down in the springtime. If you are looking for something nothing else but refreshing for the summer, what about production some Mexican raspadas?

Raspadas - Refreshing Mexican Snow Cones

Raspadas - Refreshing Mexican Snow Cones

Raspadas - Refreshing Mexican Snow Cones


Raspadas - Refreshing Mexican Snow Cones



Raspadas - Refreshing Mexican Snow Cones

A snow cone, or raspada in Mexican, is a paper cone filled with crushed ice and topped with a flavored syrup. Raspadas, which are also known as piraguas, minutas or granizados, are beloved in Texas, California and throughout the southwestern United States, as well as in Mexico.

They are well loved all over South America and different countries have their own ways of serving them. Venezuelan raspadas, for example, are topped with condensed milk. Snow cones are also enjoyed all over Asia. They are a low-cost summertime treat and they are whether served in a cup or on a stick.

Tasty Snow Cone Flavors

Classic Mexican raspada flavors consist of tamarind, guava, pistachio, cucumber, watermelon, chamoy, picocito and leche. Chamoy is fruit with chili sauce, picocito is chili and lemon and leche is a composition of milk and cinnamon.

If you belief that chili was the last thing that could cool you down on a hot day, you might like to try a chamoy raspada! The chili makes you sweat and this does nothing else but cool you down. Of course, not all raspada syrup recipes consist of chili and some are simply fruit-based.

Recipe for Mexican Raspadas

This formula serves six citizen and the composition of strawberry and lemon is nothing else but refreshing. You can use an ice crusher or ice shaving machine to make the crushed or shaved ice. Alternatively, just drop the ice cubes into a food processor or blender. Not all blenders are capable of crushing ice so check the manufacturer's instructions if you are not sure or just use a rolling pin to crush the ice yourself.

You can vary the ingredients in this Mexican snow cones formula if you like, swapping the strawberries for raspberries, the lemon juice for lime juice or using someone else type of fruit. You can also get readymade flavored syrups, which are handy for production snow cones.

What you will need:

  • 10 cups ice cubes
  • 4 cups hulled strawberries
  • 2 tablespoons lemon juice
  • 1/3 cup white sugar
  • Fresh mint, to garnish
How to make them:

Puree the strawberries in a food processor or blender, and then transfer the puree to a pan, adding the sugar. Stir it occasionally over a moderate heat until the composition boils, then stir in the lemon juice and let it cool.

Cover and chill the strawberry composition for a few hours, then shave or crush the ice and spoon it into chilled bowls or paper cones. Pour the strawberry syrup over the top and garnish with the fresh mint. Serve these raspadas immediately.

Raspadas - Refreshing Mexican Snow Cones

Wetting Her Diapers Like a Baby

Saturday, September 1, 2012

How Ice Crushers Work

How Ice Crushers Work


Types of Ice Crushers, their Use, and what can you do with them

How Ice Crushers Work

How Ice Crushers Work

How Ice Crushers Work


How Ice Crushers Work



How Ice Crushers Work

Ice Crushers commonly come in two types, hand-operated and Electric. They can both be used indubitably but they both have distinct advantages.

A hand-operated crusher regularly has a handle that can be used to manually crush the ice up using a blade and grinder. It is cranked, and then that spins the blade in order to crush the ice. A big advantage to using the hand-operated ice crusher is that it is less likely for the appliance to break or jam, as you are controlling the crushing and the number of ice that goes into the crusher.

An electric crusher has the same characteristics as a hand-operated crusher, but is largely automated. You naturally plug it in and press the on button, add ice, and then you are free to do what you want while the motor does all the hard work for you. Once the appliance has closed it will put the ice in the tray at the lowest ready for use. All this while you were away establishment your drink.

Ice Machines are best in the summer while it's hot; it's quite tremendous how much more refreshing a drink can be after you have added crushed ice. For best use, grab some cocktails ingredients and a mixer to make a indubitably great cocktail. Mixers and shakers can be brought at very low prices from any major store on the internet. It's probably best if you buy a cocktail mixing set.

Ice Crushers can also be beneficial when development Slush style drinks, Using the crushed ice in a cup and the pouring concentrated drink liquid on them, or slush syrup would make it into a very refreshing and yummy drink. This would also work nice with soft drinks, a great idea for offering the kids something different.

Crushers, although only process freezing water, should still be cleaned periodically, anyone and all has the capabilities to carry bacteria, however, when cleaning the devices, make sure care is taken nearby the area the blades are used to crush the ice for certain reasons. Most Ice crushers come with clear instructions on all the appliance needs. The Ice crusher will also regularly come with timescale instructions on how long it will take for ice to melt once crushed in the ice tray development sure that you use the ice wisely before it melts.

How Ice Crushers Work

North Face Backpacks Adult baby diapers breastfeeding Nespresso D

Friday, July 27, 2012

Your greatest Guide to Buying a Blender Ice Crusher

Your greatest Guide to Buying a Blender Ice Crusher


If one is seeing for dual-purpose kitchen appliances, then do not forget to contain a blender ice crusher in your shopping list. As you can guess from the name, this kitchen appliance functions both as a blender and as an ice crusher, development it very flexible and a must have when organizing a house party or other type of large festivity.

Your greatest Guide to Buying a Blender Ice Crusher

Your greatest Guide to Buying a Blender Ice Crusher

Your greatest Guide to Buying a Blender Ice Crusher


Your greatest Guide to Buying a Blender Ice Crusher



Your greatest Guide to Buying a Blender Ice Crusher

There are many benefits that can be obtained from buying this versatile appliance. You can save money because you only need to buy one kitchen appliance instead of two. Of procedure one will have to pay more if buying a blender with an ice crusher highlight than if buying only a blender or an ice crusher. But if buying both kitchen appliances separately, the total number would be more expensive than if purchasing this duplicate function kitchen gadget. other advantage is that it saves counter space. With so many kitchen appliances located on your counter, it is primary to buy space-saving tools and apparatuses.

This is also a perfect tool when organizing a collective conferrence at home. Every person can crush ice and blend ingredients using only a single device. Even kids can get ready all natural smoothies, homemade slushies, make vegetable salsa, and the list is endless as to the range of goodies they can make. These are some of the benefits of a blender ice crusher. If you are planning to buy one for the kitchen, here are some of the things to keep in mind.

• Make sure that you know your crushing needs. Do you want your ice chopped into smaller pieces or fine slivers? Or maybe you want your blender to just crush it? These are foremost considerations when buying the machine.

• Make sure to also reconsider the power and capability of the appliance. If you need to chop or crush large chunks, then purchase a machine with a large and fine motor to achieve the job fast and easy. But if one needs the blender to make sauce or other soft food, secure something smaller and less powerful.

• There are many options available when it comes to buying this kitchen appliance. Choose the make or style, colour, shape, and size. The size is more foremost than the others because the size will conclude how much food or ice can be blended or crushed in one go. Choosing the right style and colour is for aesthetic purposes only.

Your greatest Guide to Buying a Blender Ice Crusher

george foreman outdoor grill Ralph Lauren Perfume Men Nespresso D

Monday, June 18, 2012

NewAir Ai-300S Water Dispenser and Icemaker Gives You Two Appliances in One

NewAir Ai-300S Water Dispenser and Icemaker Gives You Two Appliances in One


Multi-tasking is now a way of life for many Americans, and having appliances and furniture that can serve more than one function is becoming increasingly popular and in demand. Furthermore, many younger Americans in urban cities are turning to condo living because they can own for roughly the same cost of renting. Consequently, these living quarters are smaller and supply less warehouse space than particular family homes. Thus, this prompts the need for home products to be more multi-functional and compact. Thankfully, many home appliance manufacturers have taken this into observation and have come out with an array of products that can achieve more than one function at a time. From transportable air conditioner and space heater combos to showerhead and filter packages, consumers now have some choices when it comes to multi-functional appliances. However, one of our popular aggregate appliances has to be water dispensers with built-in icemakers.

NewAir Ai-300S Water Dispenser and Icemaker Gives You Two Appliances in One

NewAir Ai-300S Water Dispenser and Icemaker Gives You Two Appliances in One

NewAir Ai-300S Water Dispenser and Icemaker Gives You Two Appliances in One


NewAir Ai-300S Water Dispenser and Icemaker Gives You Two Appliances in One



NewAir Ai-300S Water Dispenser and Icemaker Gives You Two Appliances in One

We've all heard about the many condition benefits associated with drinking adequate amounts of water. Water forms a major part of our body constitution, is significant for our survival, and ensures the smooth functioning of our body systems. As such, water dispensers are a great way to make sure you're drinking at least 8 glasses of water a day. The Ai-300S by NewAir dispenses cold water and includes a built-in icemaker that produces both crushed and cubed ice in a matter of minutes - exquisite for icy cold beverages in the summer!

Our stock team was able to test this great icemaker, and we were amazed by its features and performance. In fact, we used this during our monthly business party, and everyone was impressed by its create and how fast it produced ice.

First Impression:

When we unpacked the NewAir Ai-300S icemaker and water dispenser, we precisely liked its sleek and ageement design. It sported a modern-looking silver cease with easy-to-ready control panel. Furthermore, although it weighed roughly 53 pounds, because of its cubic design, it fit onto our kitchen countertop without any problems. The NewAir Ai-300S was very well packaged with abundance of insulation, and unit was free of any dings or blemishes when it was unwrapped. Included with the Ai-300S was also an easy-to-understand study manual.

Water Dispensing:

The NewAir Ai-300S provided us with perfectly chilled, 39° F water, and best of all, we appreciated the fact that it was able to accommodate both bottled water and a direct water line connection. The direct line relationship was easy to install, and also included was a filter net, drain plug for easy emptying, as well as a water level indicator. For easy maintenance, the NewAir Ai-300S transportable ice maker and water dispenser also had a self-clean button.

Ice production Capabilities:

The hallmark of the NewAir Ai-300S transportable icemaker and water dispenser was by all means; of course its ice production abilities. The unit produced two types of ice - crushed and cubed - in as little as ten minutes. One hundred ice cubes could be produced per hour, and this amounted to roughly 26 pounds of ice in one day. Furthermore, when we opened the front lid, we found that the ice basket was deep adequate to store 1.65 pounds of ice at once. This was more than adequate for our needs.

Overall, we precisely liked the NewAir Ai-300S transportable icemaker and water dispenser. If you enjoy ice in your drinks and you want the convenience of also having your own water dispenser, this one does the job wonderfully.

NewAir Ai-300S Water Dispenser and Icemaker Gives You Two Appliances in One

Waring Ice Crusher Strathwood Portable Folding Hammock Snowblower Massachusetts

Thursday, April 5, 2012

medicine of Blood Under a Fingernail

medicine of Blood Under a Fingernail


Everyone at some point in their life pinches or smashes their fingertip under or in the middle of something. It's just a part of life (ouch)!! If it were not for the fingernail, the injuries would probably heal within a few days like a coarse bruise and have no chronic succeed or pain. However, because the fingertips are extremely vascular, minor trauma, such as a crushing injury or a blow to the fingertip will cause them to positively bleed underneath the fingernail. Your skin, and the anatomy of the fingernail, plainly seals that area below the nail and does not allow the blood to drain. The blood therefore pools in the nail bed, causing an increase in pressure and intense throbbing pain. This is how the fingernail becomes darkened, and you can often positively feel throbbing pain to your injury, with each heartbeat.

medicine of Blood Under a Fingernail

medicine of Blood Under a Fingernail

medicine of Blood Under a Fingernail


medicine of Blood Under a Fingernail



medicine of Blood Under a Fingernail

Treatment and Expectations: Immediate medicine includes ice and elevation of the limb to minimize the swelling of the injury. Sounds easy you say? Well read on! The next part is not for the faint at heart.

If the pool of blood under the nail is painful and you can feel a throbbing sensation (your pulse), then relief can only be achieved by positively releasing the pressure. This can be done by creating a hole in the top of the fingernail itself, and allowing the blood to drain. Now this may sound like the last thing you want to do to an already painful finger, but if you get in the car and drive to an Urgent Care center, this is exactly what they would do. The following section describes two basic ways to painlessly perform this, one by drilling a hole, and one by burning a hole. Neither way is any more painful than the other, and both are very easy to do.

One way to do it: The hole can be made with a jeweler's drill (a positively small drill bit that you can twist by hand), or an 18 gauge syringe type needle. Clean the top of the nail off with alcohol and begin drilling the hole directly over the largest and darkest part of the blood pool. Use a quick twisting petition of the needle or drill with very itsybitsy pressure. You won't feel any further pain because the nail has no nerves in it. When you get through the nail, blood will spurt out of the hole, often with surprising force, and relief will be instantaneous. You can also try to gently squeeze out any remaining blood from the hole.

The fastest and best way to do it: The other method involves melting a hole right through the nail. Although it sounds horrifying, in my experience, it is easier, faster, less traumatic and more sterile since it cauterizes and kills bacteria with the heat. To begin, first straighten a small paperclip. Then keeping it with a pair of glove or pliers, heat the paperclip in a flame until it gets red hot, and then poke a hole in the nail. You positively should not have to push the paperclip, as it will melt through by itself. Apply just a itsybitsy pressure, right over the darkest spot, and continue until you feel a itsybitsy pop, or blood is released. You want to do this course quickly sufficient so that you won't have to reheat the paperclip again to conclude the job. When you get through the nail, blood will spurt out of the hole, often with surprising force, and relief will be instantaneous. You can also try to gently squeeze out any remaining blood from the hole.

Whichever method you choose, you don't want to go deeper than about 1/16 in. (2mm) below the nail. (Don't stress about this, just estimation it with your good judgment and get it over with!) After your done, soak in some Hydrogen Peroxide solution, repeat the soaks three times a day. This is to preclude a clot from forming and causing pressure to build up again. You might have to squeeze once or twice again, but usually, the first time does it.

When to seek professional medical attention:

-Signs and symptoms of infection. -You lose any movement or range of petition in the body part as a succeed of the trauma. -The injury appears to be worse than a simple bloody fingernail. -When in doubt.

medicine of Blood Under a Fingernail

bloom energy revitalizing conditioner

Wednesday, February 29, 2012

Fun Exploding Science Experiments

Fun Exploding Science Experiments


One of the best ways to attract your child's attention and get them interested in science is to demonstrate some fun exploding science experiments! Showing them a great explosion and then explaining to them why it happened, and how it can be recreated will create a curiosity for learning, and will show your child that science experiments can be a lot of fun! Do any of these fun exploding science experiments in your home, and let the learning begin!

Fun Exploding Science Experiments

Fun Exploding Science Experiments

Fun Exploding Science Experiments


Fun Exploding Science Experiments



Fun Exploding Science Experiments

Pseudo Explosion

To get started with your fun exploding science experiments, try one that doesn't well explode, as the sound may scare your child at first. Putting dry ice into some warm water produces gas and water vapor so rapidly that it is visible. It gives an eerie smoky effect. You can normally buy dry ice at an ice cream store. Teach your child not to hold the dry ice, as it is normally cold enough to hurt them. Demonstrate how this kind of ice is separate from quarterly ice because it doesn't melt into a liquid, it just evaporates into the air. That is because it isn't made out of water, but of carbon dioxide.

Pretend to concoct private potions with your dry ice, and watch it bubble over water. This experiment is best to teach right before Halloween so you and your child can come up with color ideas for water. Place differently colored jars of water colse to your lawn or front porch and drop in some dry ice. This will create a spooky ensue colse to your home, exquisite for the scary holiday!

Soda Fountain

One of the most predominant fun exploding science experiments is the soda fountain. interpret to your child how soda is filled with carbon dioxide gas that is linked to the liquid of the soda. When you drop in a whole roll of Mentos candy into the soda, the tiny holes in the candy reacts with the carbon dioxide in the soda, forcing the gas up and out of the bottle. Place a liter of soda in the middle of your orchad and have your kids get ready to dance colse to the fountain. Drop in the roll of Mentos candies and watch it work! While it isn't a huge explosion, it's a lot of fun!

Bag Burst

This fun exploding science experiment uses the same principles used by the first-rate erupting volcano science fair project. Take a two tablespoons of baking soda and wrap it up in some tissue paper. Then grab a zip lock bag and put in half a cup of warm water followed by a cup of vinegar. Zip the bag up partially then put it in the center of your garden, put in the tissue with baking soda and zip the bag up the rest of the way. Stand back, because the bag will progress till it explodes!

The bag explodes because once the baking soda an vinegar interact, they produce carbon dioxide gas which fills the bag until the only way out is for it to explode! As we can see, carbon dioxide was used in all these fun exploding science experiments. To make this a true day of learning, try to outline out what it is about carbon dioxide that allows it to do any of the three experiments just discussed!

Fun Exploding Science Experiments

Tassimo Coffee Machine Mens Hiking Boots Waring Ice Crusher

Monday, January 23, 2012

Remember Names and Work the Room Successfully

Remember Names and Work the Room Successfully


One hundred years ago, homeowners would gather with guests in the parlor of the home. Men would perform parlor tricks to pass the time and entertain those in attendance. Today, the most impressive parlor trick may be remembering people's names.

Remember Names and Work the Room Successfully

Remember Names and Work the Room Successfully

Remember Names and Work the Room Successfully


Remember Names and Work the Room Successfully



Remember Names and Work the Room Successfully

If I teach you the incommunicable of how to remember names, maybe you will never forget mine. I'm willing to try if you are.

A person's name is his or her popular word. Most habitancy consider it to be a qualified compliment when man remembers something so personal about them.

Memory "tricks" are a lost - albeit - impressive art form. It is especially impressive when the other man can't remember yours.

Remembering a person's name seems like a relatively easy thing to do. Memorizing a name is actually easier than memorizing lines in a play. Recalling a person's name is generally easier than memorizing a ten-digit phone number.

Yet, we often have trouble memorizing names. Usually this is because we are not focused or because we are distracted when we first hear the name. If you walk into a room, for example, you may be introduced to man before you come to be acclimated. maybe more than one man is talking to you while the introduction.

Being self-conscious is a persistent form of distraction. maybe you are a self-conscious sort who is preoccupied with how your hair looks or whether your zipper is down. (Your hair looks fine and your zipper is up - by the way.)

Finally, the handshake that often accompanies the introduction can be distracting. We're all well aware that a handshake can be too hard, too soft and too wet. A cold hand can be a shocker, too.

You have diminutive operate over such distractions, but you have the potential to facilitate "The perfect Handshake," which will allow you to focus on remembering the other person's name.

You can come to be better at remembering names with a few tips and a diminutive practice. Along the way, you will also heighten your listening skills and search for some memorization strategies that will be useful in other areas of your life. The first step involves comprehension the difference in the middle of hearing and listening.

Hearing is dissimilar Than Listening--

Simply hearing a person's name may be adequate for you to remember it. It's more likely, however, that you'll have to listen.

What's the difference in the middle of hearing and listening?

You can actually differentiate the qualified difference in the middle of hearing and listening while a disposition shower. No doubt, you abruptly hear the water streaming out of the nozzle and cascading to the tile or tub. But while you wash, pay concentration to how the water sounds as it falls colse to you. Try to identify seven or eight dissimilar types of sounds such as the water splashing off your shoulders or the droplets plunking against the plastic shower curtain liner. This uncomplicated rehearsal will teach you how to identify nuances. Now you are actually listening!

Here's other way to institution listening. When driving, listen to songs with a fresh ear. Listen to the musical arrangement instead of the lyrics. Try to identify the dissimilar instruments in the arrangement. Try listening to just one of the instruments, such as the bass guitar.

When you truly learn to listen, you should then be able to eliminate unnecessary distractions.

The perfect Handshake--

I once asked a young man where he learned to shake hands. He said, "From watching television." A handshake often occurs while introductions when names are announced. If a handshake is sloppy or awkward, it can distract a man from what is said, manufacture it much harder to remember names.

I meet a lot of habitancy who don't know how to shake hands. Some people, for example, have an aggressive, bone-crushing handshake. Other folks have a passive, dead-fish handshake. I'm teaching everybody to establish "The perfect Handshake."

The best handshakes begin with web-to-web contact. The web is the fleshy area in the middle of the thumb and the forefinger. Try to establish web-to-web experience with habitancy you meet. Web-to-web experience assures an assertive grip that conveys integrity and trust.

Try to embark on all your introductions rather than waiting to be introduced. There are benefits to reaching out first. The man who reaches out first establishes power and sway in approximately any situation. If you feel comfortable and in operate you are more likely to focus on remembering names.

How to Remember Names--

One way to remember names (or anyone else for that matter) is to use a mnemonic system. A mnemonic (the "m" is silent) is a memory aid that uses associations such as a sequence or an alliteration. There are many types of mnemonic systems, including visual, assembly, first-letter and arbitrary.

Visual mnemonics involve visual cues or triggers. For example, Greg is wearing green, so you might remember him as Green Greg. This visual method, of course, can fail you if Greg is wearing brown the next time you see him.

First-letter mnemonics provide easy formulas for remembering names. Albert Anderson's first and last name begins with the letter "A," so you might remember him as Aa. If Al always has a drink in his hand, Aa might be especially memorable.

Assembly mnemonics are more complicated than first-letter systems. Students use assembly mnemonics to put in order for exams. Most habitancy find it easier to recall the names of the planets Mars, Venus, Earth, Mercury, Jupiter, Saturn, Uranus and Neptune by remembering the phrase My Very Educated mum Just Served Us Nachos.

Even if you are not a musician, you can actually remember the lines of a treble clef music staff, which are E, G, B, D and F, if you memorize the phrase Every Good Boy Does Fine.

Do you know the names of the seven continents? You will if you use assembly mnemonics. Eat An Aspirin After A Nighttime Snack is a uncomplicated way to remember Europe, Antarctica, Asia, Africa, Australia, North America and South America.

Arbitrary mnemonics are an unlikely, but effective tool for memorizing names. Sometimes it can be easier to support information when the memory formula is random or just plain ridiculous. Most habitancy remember how to set their clocks for Daylight salvage Time by the mnemonic "Spring ahead, fall back."

Do you remember the following ditty?

Thirty days hath September
April, June and November
All the rest have thirty-one
Save February
Which has 28 in fine
Till Leap Year gives it 29

It's a terrible poem and we've never stopped trying to adjust and heighten it. The Web site Leapzine.com lists an overwhelming 47 versions! The above rhythms and rhymes are abysmal, but something about it works to help us remember how many days are in each month. Even with so many variations, this arbitrary mnemonic is helpful.

My special incommunicable for Remembering Names--

The potential to remember names is a very useful networking technique. I once earned a speaking engagement by impressing Roxanne Gibbs, editor of The Nation, a prominent Barbados newspaper. I remembered her name a half-hour after meeting her and 30 other habitancy in a buffet line.

I use "cluster imprinting" to learn names. The goal of mass imprinting is to imprint your brain with the person's name eight to ten times within three minutes of meeting them. Listen to "Catherine" say her name. If you don't hear the name, immediately ask Catherine to repeat herself. Make the request right away so you don't feel embarrassed by asking for clarification later on.

Then, repeat her name by saying, "Catherine, it's nice to meet you." You've now heard her name twice.

Immediately begin to use her name. You might say "Catherine, is that Catherine with a 'C' or Katherine with a 'K'?" She could answer, "Catherine with a 'C.'" Now your brain has been imprinted with the name six times and you have visualized it at least once. If man approaches you and Catherine, offer to introduce the new person. "Catherine, do you know David? David, this is Catherine." At this point, you've been imprinted with Catherine's name eight times.

When it's time to excuse yourself you might say, "It's been nice meeting you, Catherine," which makes the ninth time your brain has registered her name. You are not likely to forget "Catherine."

Try to recall the new name at some intervals while the next 24 hours, stretching the time span for each attempt.

5 Cool Ideas for Working a Room--

When it comes to meeting people, there's only one thing more impressive than the potential to remember a name and that is the potential to remember a bunch of names.

Making communal contacts at cocktail parties and enterprise receptions is a skill that requires conversational dexterity, consistent discipline and a desire for detail. Again, the key is to have a networking theory that allows you to focus on actually connecting with people. Taking a cue from my 5 Cool Ideas book series, here are 5 Cool Ideas for working a room.

1. Work the parking lot for fun and profit.

When working a room, there's no need to warm up. Start manufacture connections as you walk through the parking lot. After all, anyone who parks where you do might be attending the same function, right? Well, these nice strangers are attending the event so they can meet habitancy like you.

Work the lot, the foyer and the coatroom line. Use verbiage like, "Are you excited about this event?" and "Have you met anyone keen so far?" to break the ice with your new friend. Work the foyer on the way out, too.

2. Use every opportunity to shake hands.

People are your greatest resource, so embark on conversation. Commit to meeting as many habitancy as inherent in the first 15 minutes of the event. Hold out your hand and introduce yourself to everybody who walks toward you.

Avoid the temptation to hunker with man at the bar or in the projection of the room. You can always return to the most keen habitancy later. Don't sit down at these events until everybody else does. Try to sit in the center of the room. Find a seat near the head table or in an aisle or other high traffic area.

Don't drink alcohol if you are serious about remembering names and staying mentally alert.

3. Networking is about them, not you.

Make it a point to focus the conversation on the other person. Plan some conversation topics in develop and you won't be at a loss for branch matter. Keep the topics inevitable and upbeat. Avoid negative comments about habitancy and don't talk about unpleasant or off-color topics. Ask open-ended questions that encourage others to talk about themselves and their interests. Be generous and thoughtful about introducing habitancy to each other.

Always compliment habitancy as you introduce them. If you can't remember full names, use first names. If you struggle to remember a single name, softly ask the man her name and then give it to the third party.

4. Have some elevator speeches available.

An "elevator speech" is the first 15 words of an interaction. Its name is derived from the type of short to-the-point messages that are exchanged on elevators.

One version of your speech could be linked to your job. other version could be centered on your family. When it's time for you to sass questions about yourself, pick an suitable elevator speech to make a strong impression. Be brief, upbeat and former when you talk about yourself.

Make it easy for habitancy to remember your name by being memorable. Deliver your elevator speech in pithy, keen sound bytes. For instance, instead of saying, "I'm a teacher," smile and say, "I mentor heroes." Instead of saying, "I work at a day care center," stand up level and say, "I originate memories."

5. Succeed up with an "urge to action."

As you work the room, gather enterprise cards and literature from everybody you meet. In a quiet moment, write a quick note on each card to remind yourself of what you can do for the man or what they might do for you. Note the person's nickname and what you talked about so that you can Succeed up with them within 48 hours.

The more detailed your notes, the more impressed the man will be when they receive your follow-up communication.

Conclusion--

Impressing habitancy with your memory is fun. More important, however, is the potential to help habitancy feel good about themselves. Remembering a person's popular word seems like the least we can do.

Remember Names and Work the Room Successfully

Clear Plastic Umbrella Halloween Costume Mini Dress 5 Quart Stand Mixer